Is It Time For A Blown Double Glazing Repair?
Condensation can be a sign that your double glazing has blown. It happens when the seal between two panes has been broken which allows gases that are inert to escape.
The need to have your double-glazed windows repaired is vital. It will not just save you money and cut down on the noise outside, but it will also restore the insulation properties of the window.
Seals that have been damaged
The window seals in a double-glazed system are responsible for creating an airtight barrier and watertight. This helps keep the heat in and the cold out. If these seals become damaged, they can cause a myriad of problems, including misty windows, drafts and loss of energy. If your windows are starting to appear to be damaged to the seals, then it's time to consider repair or replacement.
You will notice condensation on the glass panes in the first indication. This is due to the fact that the inert gas contained within the sealed unit breaks down and allows warm air from outside to enter your home. The inert gas can't be replaced after this happens.
A black, mouldy appearance on your windows or frames is a different sign. This is a sign that the seals are broken and moisture is getting into the frame. This could lead to shrinking of the timber, warping and peeling paint. Once the window has been replaced, any moisture within the frame will be eliminated and you will be able to regain the original thermal efficiency.
If you decide to have your windows repaired or replaced you should also consider upgrading your double-glazing to A-rated energy efficient glass as this will increase your thermal efficiency and reduce your energy costs. You can determine the energy rating of your existing windows by contacting the company you purchased them from or searching online.
A drafty window can be a sign that the seals on your windows are damaged or have blown. If the window still keeps the cold outside, it's worth replacing the seals as soon as you can. This will enhance the performance of your windows.
A simple test you can perform to see if your window seals are broken is to rub the edge of your window with ice for a few seconds. If your window gets smudgey and you aren't able to remove it, then the seals are likely to be damaged. It is important to act swiftly on this because it could reduce the insulation of your double glazing, resulting in more expensive energy bills.
Water Leaks
Double glazing is an investment that pays off in the long term. It will add warmth to your home and reduces noise. It also increases energy efficiency. It's no surprise that homeowners face issues with their windows. One of the most common issues that could result in a double-glazing replacement is condensation between the panes. This can cause your windows to look dirty or worse, allow water into the property.
Water vapour condenses on glass, forming a layer of moisture that is not able to be removed. This is a normal process that happens when temperatures drop in the evening or the windows are left exposed to wet weather like heavy dew. The best method to deal with this issue is by ensuring that your home has adequate ventilation and using the use of a dehumidifier in all rooms that are prone to moisture build-up.
If you're unable to wipe away the water from your double-glazed window the likelihood is that the unit has blown. This is the only way that water can be able to enter the sealed unit after the gas has evaporated. Some companies claim that they can repair misted double-glazed units by drilling small holes in the glass and injecting chemicals into the holes. These chemicals absorb moisture from the unit. This may clear the fog or condensation in a short amount of time however it's only an interim fix that will need to be repeated.
It's unrepairable when the sealed unit fails. Your double glazing will need to be replaced since it will not have the same thermal insulation properties it did when it was new. It is worth checking if your double glazing is still under warranty with the company that installed it, in this instance, they must reinstate the warranty or offer a reduction in cost to replace the unit.
Another option is available for those with misted double glazing and that is a straightforward repair kit which is available from many online stores. This will involve drilling small holes in the glass and then spraying a special resin which fills the gaps and stops the moisture from seeping through the window panes. This is a much more affordable and durable solution, but it should be carried out professionally by someone who has the necessary experience in this area.
Deterioration
If the seals on your double glazing aren't performing as they should, moisture may get into the space between the window panes, which will cause them to become misty. This can cause windows to be less effective, as they will no longer keep the heat in and keep the cold out.
In certain circumstances misting can result in the formation of water inside your double-glazing. This could cause damage to the frame, and if left unchecked it can cause water leaks and even the growth of mould in your home.
If double glazing repairs Canterbury are still covered by warranty, it's worth asking your installer for assistance in the repair or replacement cost. If they aren't covered by warranty, you'll need to contact a professional to do the repairs.
A professional can repair your damaged double-glazed windows and restore the thermal efficiency and eliminating any condensation. It's important to have the windows repaired immediately you notice the misting since it will lower your energy bills and prevent the entry of moisture into your walls or plaster which could cause serious damage.
A double-glazed window repair that is blown will not only restore the performance of the double glazing, but also ensure the safety of your family. Windows that have been blown often have large gaps in between the glass, which aren't ideal for animals or children to play with. A professional can equalize the pressure of the unit by drilling two tiny holes. They will then use silicone sealant restore the seal of your windows.
It's a good idea check your double glazed windows to determine if they're under guarantee, and if you don't see any contact information, then you should ask your supplier to supply them as you might be eligible to claim back a portion of the installation costs. It's worth checking whether the windows you purchase come with an all-year warranty. Contact your provider immediately if you notice any issues with your double-glazed windows. You can contact them via telephone or in person. If you can you can follow up with your call in writing.
Poor Insulation
Double glazing is a great investment that can add warmth to your home and block out external noise. They are also a great insulation and energy efficiency improvement for any home. As with any home improvement there are always potential issues. A double-glazed window that begins to mist is one such issue. Misted windows can be unsightly and ruin the neat design of your home. They also pose an health hazard due to the buildup of moisture. This can be fixed by professional double glazing repair.
If you notice a buildup of condensation on your double-glazed windows it's likely that there's an issue with the gas cavity between glass panes. This signifies that the gases that are inert have evaporated and allowed warm air to seep inside your home. This is a serious problem that needs to be addressed, as the double glazing will not perform its intended function, and your home will be colder as a result.
Misting on the exterior of your window is natural and occurs mainly at night and in the early hours of the morning when the temperature drops and dew forms. It's nothing to worry about and is a result of your windows operating as they should.
The moisture on the inside of double-glazed windows is a different matter. This is usually due to low humidity and poor ventilation inside your home. Utilize extractor fans to decrease humidity in the bathroom and kitchen. Also open your windows often to allow fresh air circulation.
The majority of the time the blown double glazing repair only involves replacing the damaged pane. A professional tradesperson with experience will assess the condition of your frame and ensure that the correct measurements are taken to ensure that when a brand new window is delivered it will be cut to fit correctly. They will then take out the old window and replace with a new one, ensuring that all seals are properly installed to prevent the entry of moisture into your home.